Name: Roda penutup kain abrasif dengan tangkai
Brand: Wenling Keying Abrasives Co., Ltd.

Roda penutup kain abrasif dengan tangkai

abrasive cloth flap wheel with shank keying



Area kecil dengan kesulitan menggiling dapat menggunakan tangkai roda Flap. Kain abrasif kaya akan kelembutan dan kekuatan tarik. Burr dapat melepaskan kekuatan potong tinggi, yang menyediakan pondasi permukaan untuk prosedur selanjutnya.

Roda Flap dipasang standar, 10X10X3mm dan 3/8 "X3/8" X1/8"

Ukuran Grit: 40 #, 60 #, 80 #, 100 #, 120 #, 150 #, 180 #,240 #, 320 #, 400 #, 600 #

Kecepatan berputar Maximium: 25,000 rpm

 Hubungi kami

Hubungi kami +86(0)576-86711667

Specifications Of Abrasive Cloth Flap Wheel with Shank

Application	Non-hardened, non-heat-treated steels: Steels, carbon steels. tool steels,non-alloyed steel, copper, zinc, hard aluminum alloys, bronze, titanium; highly suit for hardened heat-treated steels: tool steels, tempering steels. Alloyed steels, cast steel;	Brand	Keying	Code
Diameter	titanium； highly suit for hardened	Origin	Made in China	Grain Type	Zirconia
Grit	heat-treated steels: tool steels,	Industry	Fabrication	Backing	Fiberglass, plastic, 77mm plastic
Maximum RPM	tempering steels. Alloyed steels, cast steel;	Minimum Order Quantity	1000pcs	Compatible Tool	high powered angle grinders

Table Of Abrasive Cloth Flap Wheel with Shank Size and RPM Chart

Abrasive Grit Formula	Grit	Shape Type	Dia	Height	Dia of Shank	OPT RPM
Aluminum Oxide	P40 P60 P80 P100 P120 P240 P320 P400 P600	Cylinder	10mm	10mm-15mm	3mm	38000
			15mm	10-15mm	3mm	38000
			15mm	5mm	3mm	38000
			20mm	5-10mm	3mm	19000
			20mm	25-30mm	3mm	25000
			20mm	5-20mm	6mm	19000
Silicon Carbide	P240 P400 P600 P800 P1000 P1200		20mm	25-30mm	6mm	19000
			25mm	5-20mm	3mm	15000
			25mm	25-30mm	3mm	15000
			25mm	5-20mm	6mm	15000
			25mm	25-30mm	6mm	15000
			30mm	3-8mm	6mm	12000
Ceramic and AO Combined	P40 P80 P120		30mm	10-40mm	6mm	12000
			40mm	3-10mm	6mm	9600
			40mm	15-40mm	6mm	12000
			50mm	5-30mm	6mm	9600
			50mm	35-60mm	6mm	7000
Ceramic and AO Combined	P60 P80 P120		60mm	5-10mm	6mm	6300
				15-30mm	6mm	6300
				35-60mm	6mm	6300
			70mm	5-10mm	6mm	4800
				15-30mm	6mm	6300
Zirconia Alumina	P60 P80			35-60mm	6mm	6300
			75mm	5-10mm	6mm	4800
				15-30mm	6mm	4800
				35-60mm	6mm	4800
			80mm	5-15mm	6mm	4800
			80mm	20-60mm	6mm	4800
			100mm	10-60mm	6mm	4800

Application	·Removal of rust ·Weld preparation ·Removing discoloration ·Sanding down ·Surface finishing ·Deburring ·Smoothing and blending of flaws	Brand	KEYING	Commodity Code	FSFS361+Flat+4"+Grit+SC
Compatible Tool	Angle grinder	Country of Origin	China	Raw Material	Silicon Carbide
Backing	Fiber	For Use On	Glass, Stone, Concrete, Granite, Marble, Ceramic, Rubber, Plastic, Fiberglass	Grit Size	16#, 24#, 36#, 40#, 50#, 60#, 80#, 100#, 120#
Diameter Metric	4"/4.5"/5"/6''/7''	Industries	Automobile manufacturing, construction, light industry, shipbuilding, machinery manufacturing	Hole Diameter	16mm/22mm
Maximum RPM	8500-15300	Type of hole	4 Slotted, 8 Slotted, 6Slitted, Flat	Standard Pack Quantity	25pcs

Features Of Abrasive Cloth Flap Wheel with Shank

Flap wheels with Shank are suitable for grinding small areas, dead angles, inner hole surfaces, and slit gaps that are difficult to reach. The Features of the abrasive clothes are various with multipurpose application capacity. It is flexible and rich in tensile strength. It could remove the burr and uneven, rough surface with fast grinding force efficiently, meanwhile, can make sure the performance result achieves a slightly finer surface. It is a good product for pre-painting or mirror finishing preparation procedures.

High flexibility to optimum adaptation to contours
Steadily high stock removal through the entire tool life and aggressive coated abrasive resin is freed up constantly
The design of opening spaces and flat bonded make the abrasive tools can process a face-down position, so can touch closely to the edges and corners.

Roda Flap kain abrasif dengan tangkai yang berlaku untuk industri

Industri yang berlaku

Industri pengolahan kimia
Steelworks
Pipa
Industri otomotif
Mesin Teknik
Antariksa, perawatan turbin gas, dan perbaikan
Bangunan
Pengolahan cetakan dan alat
Bangunan pengiriman

Roda Flap kain abrasif dengan tangkai yang berlaku untuk industri

Tujuan aplikasi

Perata
Penggerindaan dan pengelasan
Permukaan struktur
Penggilingan halus langkah demi langkah

Instruksi keselamatan dari roda penutup kain abrasif dengan batang

Cara menggunakan roda Flap kain abrasif dengan Shank

Petunjuk:

Instructions Of Abrasive Cloth Flap Wheel With Shank

Silakan coba memilih lingkungan dalam ruang dan pakai pelindung dan kacamata.
Tidak pernah melebihi kecepatan rotasi maksimum yang diizinkan untuk alasan keamanan.
Untuk memiliki tingkat penghilangan gppd syocl, kualitas permukaan, dan pemuatan termal pada benda kerja, kinerja terbaik akan dengan kecepatan pemotongan yang direkomendasikan pada 15-20m/detik.
Jangan dorong dan tingkatkan tekanan selama pemrosesan untuk mencapai permukaan yang lebih halus, tetapi coba untuk beralih ke roda penutup grit yang berbeda.

Peringatan keselamatan:

TDia menjepit panjang antara shank dan Gerinda harus lebih dari 15mm.

NPernah melebihi kecepatan aman maksimum saat pisau sangat panjang. Coba Konsultasikan dengan penjualan Anda untuk memeriksa kecepatan putar keamanan sebelum digunakan.